vin-number
Holden Ute VIN Number
Use this guide to find the VIN on your Holden Ute, understand what it tells you, and start the right parts enquiry for your exact vehicle.
The Holden Ute (Commodore-based coupe-utility) ran from the VG (1990) through VP, VR, VS, VU, VY, VZ, VE and VF until Australian production ended in 2017. It is a car-based ute — distinct from the Rodeo and Colorado — and shares most mechanical and many front-end parts with the Commodore of the same series.
Where to find your Holden VIN
On most Holdens the 17-character VIN can be found in several places — check whichever is easiest to read:
- At the base of the windscreen on the driver's side, visible from outside the car.
- Stamped into the floor of the driver's or front-passenger footwell, under the carpet or trim flap.
- On the compliance / identification plate in the driver's door opening or in the engine bay.
- On your registration papers and registration certificate.
A Holden VIN is 17 characters and never uses the letters I, O or Q. The 10th character is the model-year code; because the model year can run ahead of the build date, cross-check it against the build month and year on the compliance plate.
The compliance plate also lists paint, trim, engine and transmission codes. Those codes are what pin down an exact panel colour or interior match, so it helps to send them with your enquiry. Holdens built before 1988 may not carry a 17-character VIN at all — on those cars use the body / compliance plate and the chassis and engine numbers instead.
On this model
The Commodore Ute is Australian-built and carries the 6H8 manufacturer code and the same VIN and build-plate conventions as its donor Commodore (radiator support on VT-VZ era, passenger strut tower on VE/VF). Quote the series and build date from the plate.
This page also draws on later year-by-year data for Holden UTE to cover modern variants.
Frequently asked questions
Where is the VIN on a Holden Ute?
Check the base of the windscreen on the driver's side, the floor of the driver's or passenger footwell, the compliance plate in the door opening or engine bay, and your registration papers. The exact spot can vary by year and body style.
How long is a Holden VIN and what does it tell you?
A modern Holden VIN is 17 characters and never uses I, O or Q. It identifies the vehicle, and the 10th character is the model-year code — cross-check it against the build date on the compliance plate.
My older Holden does not seem to have a 17-character VIN. Why?
Holdens built before 1988 generally pre-date the 17-character VIN. Use the body / compliance plate and the chassis and engine numbers to identify the car instead.
Can I ask for parts once I have my VIN?
Yes. Send the VIN plus any paint, trim, engine and transmission codes from the compliance plate and we will check availability for your exact vehicle.
Quick enquiry
Submit your Holden parts enquiry and we'll check availability.
We handle genuine, aftermarket, new and second-hand Holden parts enquiries.