vin-number
Holden Tigra VIN Number
Use this guide to find the VIN on your Holden Tigra, understand what it tells you, and start the right parts enquiry for your exact vehicle.
The Holden Tigra (XC series, 2005-2006) was a low-volume two-seat coupe-convertible sold with a "TwinTop" folding steel hard-top, a rebadged Opel Tigra TwinTop built in Europe by Opel and imported for the Australian market. It used a transverse 1.8-litre petrol four driving the front wheels and shared its underpinnings with the Corsa/Barina small-car family.
Where to find your Holden VIN
On most Holdens the 17-character VIN can be found in several places — check whichever is easiest to read:
- At the base of the windscreen on the driver's side, visible from outside the car.
- Stamped into the floor of the driver's or front-passenger footwell, under the carpet or trim flap.
- On the compliance / identification plate in the driver's door opening or in the engine bay.
- On your registration papers and registration certificate.
A Holden VIN is 17 characters and never uses the letters I, O or Q. The 10th character is the model-year code; because the model year can run ahead of the build date, cross-check it against the build month and year on the compliance plate.
The compliance plate also lists paint, trim, engine and transmission codes. Those codes are what pin down an exact panel colour or interior match, so it helps to send them with your enquiry. Holdens built before 1988 may not carry a 17-character VIN at all — on those cars use the body / compliance plate and the chassis and engine numbers instead.
On this model
Because the Tigra was built by Opel in Europe rather than in Australia, its VIN carries an Opel/GM world manufacturer identifier and does not begin with the Holden 6H8 sequence. Confirm you have the XC series by checking the compliance and identification plate rather than assuming from the badge alone. When ordering or checking interchange, it helps to cross-reference the car against the equivalent Opel Tigra TwinTop, since the two are mechanically the same vehicle. Quoting the full identifier from the plate lets a supplier match trim, roof and drivetrain details accurately. If any character on the plate is unclear, have it verified rather than guessing, as a single wrong digit can lead to the wrong part.
This page also draws on later year-by-year data for Holden Tigra to cover modern variants.
Frequently asked questions
Where is the VIN on a Holden Tigra?
Check the base of the windscreen on the driver's side, the floor of the driver's or passenger footwell, the compliance plate in the door opening or engine bay, and your registration papers. The exact spot can vary by year and body style.
How long is a Holden VIN and what does it tell you?
A modern Holden VIN is 17 characters and never uses I, O or Q. It identifies the vehicle, and the 10th character is the model-year code — cross-check it against the build date on the compliance plate.
My older Holden does not seem to have a 17-character VIN. Why?
Holdens built before 1988 generally pre-date the 17-character VIN. Use the body / compliance plate and the chassis and engine numbers to identify the car instead.
Can I ask for parts once I have my VIN?
Yes. Send the VIN plus any paint, trim, engine and transmission codes from the compliance plate and we will check availability for your exact vehicle.
Quick enquiry
Submit your Holden parts enquiry and we'll check availability.
We handle genuine, aftermarket, new and second-hand Holden parts enquiries.