Holden Spare Parts

Holden parts, VIN guides, engine guides, and enquiries

Holden & HSV spare parts enquiries, Australia-wide

engine-number

Holden Shuttle Engine Number

Years
10 items

1982, 1983, 1984, 1985, 1986, 1987, ...

Show full list
1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991
SeriesWFR, None
SubmodelsLT, Window, LS, None
Engines
9 items

1.8 Petrol, 2.0 Petrol, 2.0D Diesel, 1.8L, 1.9L, 2.0L, ...

Show full list
1.8 Petrol, 2.0 Petrol, 2.0D Diesel, 1.8L, 1.9L, 2.0L, 1.9L CARB, 1.8L CARB, 2.0L DIESEL
Gear typesAutomatic, Manual, 4 Speed Automatic, 5 Speed Manual, 4 SP AUTOMATIC, 5 SP MANUAL
ChassisSUV, Van, WAGON, Window Van, 2D Wagon
PartsVIN NumberEngine NumberOwner & Service Manuals (4)

Use this guide to locate the engine number on your Holden Shuttle and line up the right engine-related parts enquiry.

The Holden Shuttle was a mid-size van and people-mover sold in Australia from around 1982 into the early 1990s, a rebadged version of the Isuzu Fargo (WFR series) built in Japan and offered with petrol or diesel four-cylinder engines in a cab-forward layout.

Where to find your Holden engine number

The stamped engine number is on a machined pad on the block. Its location depends on the engine family:

  • Inline six-cylinder: on a pad on the right-hand side of the block, above the engine-mount boss.
  • V8 (253 / 308, 4.2 / 5.0 litre): on a pad on the left-hand side of the block, above the engine mounting.
  • V6 (Buick-derived, Ecotec, Alloytec): on the front left-hand face of the block, below the ignition coil.
  • Later V6 and LS V8 models: the build / engine plate sits on the radiator support panel (VT-VZ era) or the passenger-side strut tower (VE / VF era).

You may need to wipe the pad clean to read the stamped number, and on air-conditioned cars the compressor can sit in front of it. Older Holden engines use a capacity-plus-tune prefix (for example 186S or a Q-series V8 code), while modern engines (Ecotec, Alloytec and the LS V8 family) use a GM engine code plus a separate stamped serial.

For the most accurate part match, send us both the engine code or prefix and the full stamped number, along with whether the car is automatic or manual.

On this model

Power came from Isuzu four-cylinder engines in either petrol or diesel form, and these are identified by Isuzu's own engine coding and the serial stamped on the block rather than by the Holden alphanumeric prefix system used on locally built cars. The first thing to establish is simply whether the engine is petrol or diesel, as this determines almost everything downstream. From there, note the stamped engine number and the capacity marked on the vehicle, then match those against Isuzu records. Because exact engine codes can vary by year and market, it is best to confirm the specific code from the block stamping rather than assume it, and to cross-reference the corresponding Isuzu Fargo/WFR engine to be certain of the correct components.

This page also draws on later year-by-year data for Holden Shuttle to cover modern variants.

Frequently asked questions

Where is the engine number on a Holden Shuttle?

It is stamped on a machined pad on the engine block. Inline sixes are on the right side above the engine mount, the 253/308 V8s on the left side above the mount, and the V6 engines on the front left face below the ignition coil. You may need to wipe the pad clean to read it.

What is the difference between an engine prefix and an engine code?

Older Holden engines use a capacity-plus-tune prefix stamped on the block, while modern engines (Ecotec, Alloytec and the LS V8 family) use a GM engine code plus a separate stamped serial.

Do you match engine numbers to parts?

Yes. Send us the engine code or prefix and the full stamped number, plus whether the car is automatic or manual, and we will match the right engine-related part.

Quick enquiry

Submit your Holden parts enquiry and we'll check availability.

We handle genuine, aftermarket, new and second-hand Holden parts enquiries.

Help us match the exact parts for your car. Complete at least one of the two sections below — your rego & state, or the full car details.

Option 1 Rego & state one of two required

Fastest — we look the car up from the plate.

Option 2 Exact car details one of two required

Best match if you have the build plate or VIN.

Availability will be checked before anything is quoted.

Holden Shuttle engine number — locate, decode and date your car

Checking a Holden Shuttle engine number is free. The number identifies the engine family and build, which is what confirms the right engine, cooling and ancillary parts. Find it, then send it with your parts enquiry and we will help you read it.

Where is the engine number on a Holden Shuttle?

It is stamped into a machined pad on the engine block — commonly near the front of the block, on the bellhousing flange, or beside a cylinder head. The exact spot depends on the engine family, so use the engine guidance above for the Shuttle and cross-check it against the build plate.

How do I look up or decode a Shuttle engine number?

The leading letters are the engine prefix (family and specification) and the digits are the build sequence. There is no public live lookup, so the fastest accurate decode is to send us the full prefix and number — we will identify the engine and the parts that suit it, free of charge.

What do the engine number prefix codes mean?

The prefix identifies the engine type, capacity and state of tune — it is how otherwise similar variants are told apart. Matching the prefix is what makes sure replacement parts actually fit.

Can the engine number tell me the year of my Shuttle?

On its own it indicates the engine family rather than a precise year. Read it alongside the VIN and build plate. Across the years the Shuttle was built 1982–1991, so the series and VIN pin down the exact build.