vin-number
Holden Isuzu VIN Number
Use this guide to find the VIN on your Holden Isuzu, understand what it tells you, and start the right parts enquiry for your exact vehicle.
Holden sold a wide range of Isuzu-derived vehicles in Australia over the years, including the Rodeo and Colorado utes, the Jackaroo and Monterey four-wheel-drive wagons and the Shuttle van, so the first step is always to identify which specific model you actually have. Because "Holden Isuzu" covers several very different vehicles rather than a single model, pinning down the exact model, generation and body style is essential before you go any further.
Where to find your Holden VIN
On most Holdens the 17-character VIN can be found in several places — check whichever is easiest to read:
- At the base of the windscreen on the driver's side, visible from outside the car.
- Stamped into the floor of the driver's or front-passenger footwell, under the carpet or trim flap.
- On the compliance / identification plate in the driver's door opening or in the engine bay.
- On your registration papers and registration certificate.
A Holden VIN is 17 characters and never uses the letters I, O or Q. The 10th character is the model-year code; because the model year can run ahead of the build date, cross-check it against the build month and year on the compliance plate.
The compliance plate also lists paint, trim, engine and transmission codes. Those codes are what pin down an exact panel colour or interior match, so it helps to send them with your enquiry. Holdens built before 1988 may not carry a 17-character VIN at all — on those cars use the body / compliance plate and the chassis and engine numbers instead.
On this model
Isuzu-based Holdens that were imported typically carry an Isuzu or overseas World Manufacturer Identifier rather than Holden's 6H8 prefix, while older vehicles are usually identified from the compliance and identification plate along with the stamped chassis and engine numbers. Start by reading the plate to confirm the specific model and generation, then use those details to cross-reference the matching Isuzu vehicle. The plate is the most reliable way to separate, for example, one generation of Rodeo from another. Recording the numbers exactly as they appear will help when checking parts against Isuzu references. If the plate is missing or unclear, the chassis and engine stampings on the vehicle itself are the next best guide.
This page also draws on later year-by-year data for Holden Isuzu to cover modern variants.
Frequently asked questions
Where is the VIN on a Holden Isuzu?
Check the base of the windscreen on the driver's side, the floor of the driver's or passenger footwell, the compliance plate in the door opening or engine bay, and your registration papers. The exact spot can vary by year and body style.
How long is a Holden VIN and what does it tell you?
A modern Holden VIN is 17 characters and never uses I, O or Q. It identifies the vehicle, and the 10th character is the model-year code — cross-check it against the build date on the compliance plate.
My older Holden does not seem to have a 17-character VIN. Why?
Holdens built before 1988 generally pre-date the 17-character VIN. Use the body / compliance plate and the chassis and engine numbers to identify the car instead.
Can I ask for parts once I have my VIN?
Yes. Send the VIN plus any paint, trim, engine and transmission codes from the compliance plate and we will check availability for your exact vehicle.
Quick enquiry
Submit your Holden parts enquiry and we'll check availability.
We handle genuine, aftermarket, new and second-hand Holden parts enquiries.