vin-number
Holden Insignia VIN Number
Use this guide to find the VIN on your Holden Insignia, understand what it tells you, and start the right parts enquiry for your exact vehicle.
The Holden Insignia was a rebadged Opel Insignia sold new in Australia between roughly 2015 and 2017, offered here almost exclusively as the high-performance Insignia VXR, a five-door liftback powered by a 2.8-litre turbocharged V6 driving all four wheels. Being European-built by Opel, it was a low-volume imported flagship and is distinct from the later Commodore ZB (2018-2020), which was the next-generation Opel Insignia B rebadged as a Commodore rather than sold under the Insignia name.
Where to find your Holden VIN
On most Holdens the 17-character VIN can be found in several places — check whichever is easiest to read:
- At the base of the windscreen on the driver's side, visible from outside the car.
- Stamped into the floor of the driver's or front-passenger footwell, under the carpet or trim flap.
- On the compliance / identification plate in the driver's door opening or in the engine bay.
- On your registration papers and registration certificate.
A Holden VIN is 17 characters and never uses the letters I, O or Q. The 10th character is the model-year code; because the model year can run ahead of the build date, cross-check it against the build month and year on the compliance plate.
The compliance plate also lists paint, trim, engine and transmission codes. Those codes are what pin down an exact panel colour or interior match, so it helps to send them with your enquiry. Holdens built before 1988 may not carry a 17-character VIN at all — on those cars use the body / compliance plate and the chassis and engine numbers instead.
On this model
Identification on the Insignia does not follow the usual Holden pattern, so check the model specifics rather than assuming an Australian-built car. As an Opel-manufactured vehicle its VIN carries a European Opel world manufacturer identifier (the Opel WMI typically beginning W0L), not the 6H8 sequence used on locally produced Holdens, which is the quickest way to confirm you are dealing with the genuine Opel-based Insignia. Use the compliance and identification plate to verify the build is a 2015-2017 Holden Insignia and not the later Commodore ZB, since the ZB is a separate model generation despite sharing Opel Insignia underpinnings. Matching the VIN and plate details before ordering matters here because parts are frequently cross-referenced against Opel/Vauxhall catalogues.
This page also draws on later year-by-year data for Holden Insignia to cover modern variants.
Frequently asked questions
Where is the VIN on a Holden Insignia?
Check the base of the windscreen on the driver's side, the floor of the driver's or passenger footwell, the compliance plate in the door opening or engine bay, and your registration papers. The exact spot can vary by year and body style.
How long is a Holden VIN and what does it tell you?
A modern Holden VIN is 17 characters and never uses I, O or Q. It identifies the vehicle, and the 10th character is the model-year code — cross-check it against the build date on the compliance plate.
My older Holden does not seem to have a 17-character VIN. Why?
Holdens built before 1988 generally pre-date the 17-character VIN. Use the body / compliance plate and the chassis and engine numbers to identify the car instead.
Can I ask for parts once I have my VIN?
Yes. Send the VIN plus any paint, trim, engine and transmission codes from the compliance plate and we will check availability for your exact vehicle.
Quick enquiry
Submit your Holden parts enquiry and we'll check availability.
We handle genuine, aftermarket, new and second-hand Holden parts enquiries.