Holden Spare Parts

Holden parts, VIN guides, engine guides, and enquiries

Holden & HSV spare parts enquiries, Australia-wide

vin-number

Holden HSV Sv99 VIN Number

Years1999
SeriesVT II
Engines5.7i Petrol
Gear typesAutomatic, Manual
ChassisSedan
PartsVIN NumberEngine Number

Use this guide to find the VIN on your Holden HSV Sv99, understand what it tells you, and start the right parts enquiry for your exact vehicle.

The HSV SV99 was a limited-edition Holden Special Vehicles model released around 1999 on the VT-era Commodore platform, powered by the 5.7-litre LS1 V8 and now regarded as a collectible. Exact production figures and specification details should be confirmed against a verified build record.

Where to find your Holden VIN

On most Holdens the 17-character VIN can be found in several places — check whichever is easiest to read:

  • At the base of the windscreen on the driver's side, visible from outside the car.
  • Stamped into the floor of the driver's or front-passenger footwell, under the carpet or trim flap.
  • On the compliance / identification plate in the driver's door opening or in the engine bay.
  • On your registration papers and registration certificate.

A Holden VIN is 17 characters and never uses the letters I, O or Q. The 10th character is the model-year code; because the model year can run ahead of the build date, cross-check it against the build month and year on the compliance plate.

The compliance plate also lists paint, trim, engine and transmission codes. Those codes are what pin down an exact panel colour or interior match, so it helps to send them with your enquiry. Holdens built before 1988 may not carry a 17-character VIN at all — on those cars use the body / compliance plate and the chassis and engine numbers instead.

On this model

Identification starts with the base VT Commodore build plate, typically located on the radiator support panel in the engine bay, which carries the VIN and standard body and paint data. Beyond this, a genuine SV99 should also carry its own HSV build plate or build number that ties the car to the limited-edition run. Cross-checking the base Commodore details against the HSV plate is the surest way to confirm a car is what it claims to be. If either plate is missing, altered or does not match, treat the identification as unconfirmed until it can be verified against HSV records.

Frequently asked questions

Where is the VIN on a Holden HSV Sv99?

Check the base of the windscreen on the driver's side, the floor of the driver's or passenger footwell, the compliance plate in the door opening or engine bay, and your registration papers. The exact spot can vary by year and body style.

How long is a Holden VIN and what does it tell you?

A modern Holden VIN is 17 characters and never uses I, O or Q. It identifies the vehicle, and the 10th character is the model-year code — cross-check it against the build date on the compliance plate.

My older Holden does not seem to have a 17-character VIN. Why?

Holdens built before 1988 generally pre-date the 17-character VIN. Use the body / compliance plate and the chassis and engine numbers to identify the car instead.

Can I ask for parts once I have my VIN?

Yes. Send the VIN plus any paint, trim, engine and transmission codes from the compliance plate and we will check availability for your exact vehicle.

Quick enquiry

Submit your Holden parts enquiry and we'll check availability.

We handle genuine, aftermarket, new and second-hand Holden parts enquiries.

Help us match the exact parts for your car. Complete at least one of the two sections below — your rego & state, or the full car details.

Option 1 Rego & state one of two required

Fastest — we look the car up from the plate.

Option 2 Exact car details one of two required

Best match if you have the build plate or VIN.

Availability will be checked before anything is quoted.

Holden Sv99 VIN — decode, check and build details

A Holden HSV Sv99 VIN check is free and identifies the year, model, plant and build of your car — the detail that gets parts right the first time. Use it together with the engine number, then start your parts enquiry.

Where do I find the VIN on a Holden HSV Sv99?

See the location guide above — typical spots are the compliance/build plate, the base of the windscreen, and the driver-side door jamb. The VIN and build plate together give the fullest picture.

How do I decode a Sv99 VIN?

Holden VINs from 1989 on are 17 characters that encode the manufacturer, model, body, engine and build sequence; earlier cars use a shorter chassis or identification number. Send us the VIN and we will help decode it for parts identification.

Can I get a build sheet or options list from the VIN?

The VIN plus the build/compliance plate reveal the original options and trim. We use that to match the correct variant-specific parts — include it with your enquiry.

Is a Holden VIN check free?

Yes. Reading the VIN for parts identification is free — there is no charge to ask us to confirm what fits your vehicle.