Holden Spare Parts

Holden parts, VIN guides, engine guides, and enquiries

Holden & HSV spare parts enquiries, Australia-wide

vin-number

Holden HSV Nitron VIN Number

Years1992
SeriesVP
Engines3.8i Petrol
Gear typesAutomatic, Manual
ChassisSedan
PartsVIN NumberEngine Number

Use this guide to find the VIN on your Holden HSV Nitron, understand what it tells you, and start the right parts enquiry for your exact vehicle.

The HSV SV Nitron was a limited-edition, VX-era HSV (understood to be around 2001) built on the V8 Commodore platform, with distinctive paint and trim and small production numbers that make it collectible today. Exact specification, colours and build volumes varied, so treat any single source as indicative and confirm details against the individual car.

Where to find your Holden VIN

On most Holdens the 17-character VIN can be found in several places — check whichever is easiest to read:

  • At the base of the windscreen on the driver's side, visible from outside the car.
  • Stamped into the floor of the driver's or front-passenger footwell, under the carpet or trim flap.
  • On the compliance / identification plate in the driver's door opening or in the engine bay.
  • On your registration papers and registration certificate.

A Holden VIN is 17 characters and never uses the letters I, O or Q. The 10th character is the model-year code; because the model year can run ahead of the build date, cross-check it against the build month and year on the compliance plate.

The compliance plate also lists paint, trim, engine and transmission codes. Those codes are what pin down an exact panel colour or interior match, so it helps to send them with your enquiry. Holdens built before 1988 may not carry a 17-character VIN at all — on those cars use the body / compliance plate and the chassis and engine numbers instead.

On this model

Identification generally follows the underlying VX Commodore, with the compliance and build details on the plate fitted to the radiator support panel in the engine bay. In addition, HSV cars of this era carry their own HSV build plate and individual build number, which is the key to confirming a genuine SV Nitron rather than a base Commodore. Cross-check the base VIN and the HSV plate against each other and against any available documentation. Given the limited-edition status, verifying the build number and its records is strongly recommended before purchase.

Frequently asked questions

Where is the VIN on a Holden HSV Nitron?

Check the base of the windscreen on the driver's side, the floor of the driver's or passenger footwell, the compliance plate in the door opening or engine bay, and your registration papers. The exact spot can vary by year and body style.

How long is a Holden VIN and what does it tell you?

A modern Holden VIN is 17 characters and never uses I, O or Q. It identifies the vehicle, and the 10th character is the model-year code — cross-check it against the build date on the compliance plate.

My older Holden does not seem to have a 17-character VIN. Why?

Holdens built before 1988 generally pre-date the 17-character VIN. Use the body / compliance plate and the chassis and engine numbers to identify the car instead.

Can I ask for parts once I have my VIN?

Yes. Send the VIN plus any paint, trim, engine and transmission codes from the compliance plate and we will check availability for your exact vehicle.

Quick enquiry

Submit your Holden parts enquiry and we'll check availability.

We handle genuine, aftermarket, new and second-hand Holden parts enquiries.

Help us match the exact parts for your car. Complete at least one of the two sections below — your rego & state, or the full car details.

Option 1 Rego & state one of two required

Fastest — we look the car up from the plate.

Option 2 Exact car details one of two required

Best match if you have the build plate or VIN.

Availability will be checked before anything is quoted.

Holden Nitron VIN — decode, check and build details

A Holden HSV Nitron VIN check is free and identifies the year, model, plant and build of your car — the detail that gets parts right the first time. Use it together with the engine number, then start your parts enquiry.

Where do I find the VIN on a Holden HSV Nitron?

See the location guide above — typical spots are the compliance/build plate, the base of the windscreen, and the driver-side door jamb. The VIN and build plate together give the fullest picture.

How do I decode a Nitron VIN?

Holden VINs from 1989 on are 17 characters that encode the manufacturer, model, body, engine and build sequence; earlier cars use a shorter chassis or identification number. Send us the VIN and we will help decode it for parts identification.

Can I get a build sheet or options list from the VIN?

The VIN plus the build/compliance plate reveal the original options and trim. We use that to match the correct variant-specific parts — include it with your enquiry.

Is a Holden VIN check free?

Yes. Reading the VIN for parts identification is free — there is no charge to ask us to confirm what fits your vehicle.