vin-number
Holden Statesman VIN Number
Use this guide to find the VIN on your Holden Statesman, understand what it tells you, and start the right parts enquiry for your exact vehicle.
The Statesman is Holden's long-wheelbase luxury sedan. After the original HQ-WB era (1971-1985), the name was revived on the VQ (1990) and ran through VR, VS, WH, WK and WL before Caprice became the surviving nameplate. It shares much of its driveline and front-end engineering with the Commodore of the same era but uses long-wheelbase-specific body, glass and interior parts.
Where to find your Holden VIN
On most Holdens the 17-character VIN can be found in several places — check whichever is easiest to read:
- At the base of the windscreen on the driver's side, visible from outside the car.
- Stamped into the floor of the driver's or front-passenger footwell, under the carpet or trim flap.
- On the compliance / identification plate in the driver's door opening or in the engine bay.
- On your registration papers and registration certificate.
A Holden VIN is 17 characters and never uses the letters I, O or Q. The 10th character is the model-year code; because the model year can run ahead of the build date, cross-check it against the build month and year on the compliance plate.
The compliance plate also lists paint, trim, engine and transmission codes. Those codes are what pin down an exact panel colour or interior match, so it helps to send them with your enquiry. Holdens built before 1988 may not carry a 17-character VIN at all — on those cars use the body / compliance plate and the chassis and engine numbers instead.
On this model
The revived Statesman is Australian-built and carries the 6H8 manufacturer code with Commodore-era VIN and build-plate conventions; the original 1971-1985 cars pre-date the 17-character VIN and use body-plate identification. Quote the series and build date from the plate.
This page also draws on later year-by-year data for Holden Statesman to cover modern variants.
Frequently asked questions
Where is the VIN on a Holden Statesman?
Check the base of the windscreen on the driver's side, the floor of the driver's or passenger footwell, the compliance plate in the door opening or engine bay, and your registration papers. The exact spot can vary by year and body style.
How long is a Holden VIN and what does it tell you?
A modern Holden VIN is 17 characters and never uses I, O or Q. It identifies the vehicle, and the 10th character is the model-year code — cross-check it against the build date on the compliance plate.
My older Holden does not seem to have a 17-character VIN. Why?
Holdens built before 1988 generally pre-date the 17-character VIN. Use the body / compliance plate and the chassis and engine numbers to identify the car instead.
Can I ask for parts once I have my VIN?
Yes. Send the VIN plus any paint, trim, engine and transmission codes from the compliance plate and we will check availability for your exact vehicle.
Quick enquiry
Submit your Holden parts enquiry and we'll check availability.
We handle genuine, aftermarket, new and second-hand Holden parts enquiries.